Specifications

Chapter 5— Advanced Printer Programming

IPL Programmer’s Reference Manual 57

IPL Commands and Emulation Mode

IPL Command Name

Syntax

Page

Works in

Emulation Mode?

12 Volt Supply Value, Transmit U 201 Yes

Abort Print Job <EM> 86 Yes

Advanced Mode, Select <ESC>C 91 Yes

Alphanumeric Field Separator <GS> 92 Yes

Ambient Temperature, Transmit A 201 N/A

Amount of Storage, Define <SI>N 114 N/A

Audible Alarm, Enable or Disable <SI>a 114 N/A

Auto-Transmit 1, Enable <ESC>j 115 Yes

Auto-Transmit 2, Enable <ESC>d 115 Yes

Auto-Transmit 3, Enable <ESC>e 115 Yes

Auto-Transmit 1, 2, and 3, Disable <ESC>k 115 Yes

Bar Code, Select Type c 141 Yes

Bar Code Field, Create or Edit B 161 Yes

Batch Count, Set <US> 93 Yes

Bitmap Cell Height for Graphic or UDF, Define y 162 Yes

Bitmap Cell Width for Graphic or UDF, Define x 164 Yes

Bitmap User-Defined Font, Clear or Define T 165 Yes

Border Around Human-Readable Text, Define b 165 Yes

Box Field, Create or Edit W 166 Yes

Character Bitmap Origin Offset, Define X 167 Yes

Character Rotation or Bar Code Ratio, Define r 168 Yes

Clear All Data <CAN> 93 Yes

Clear Data From Current Field <DEL> 93 Yes

Code 39 Prefix Character, Define p 171 Yes

Command Tables, Load C 171 Yes

Command Terminator ; 201 Yes

Command Terminator 1 <NUL> 93 Yes

Command Terminator 2 <LF> 94 Yes

Communication Port Configuration, Set <SI>P 116 Yes

Configuration Parameters, Transmit <ESC>p 94 Yes

Control Panel Access Permission, Set <SI>A 117 Yes

Current Edit Session, Save N 172 Yes

Cut <SO> 94 Yes

Cutter, Enable or Disable <SI>c 118 Yes

Dark Adjust K 201 Yes

Dark Adjust, Set <SI>d 118 Yes

Data Shift - International Characters <SUB> 94 Yes