Specifications

Chapter 2— Downloading Fonts to the Printer
16 IPL Programmer’s Reference Manual
Note: You can create Traditional or Simplified Chinese bitmap fonts up to
a size of 16 points at 400 dpi or 32 points at 200 dpi. The EasyCoder F4,
PF2i, PF4i, and PM4i do not support bitmapped Chinese, Japanese, or
Korean fonts.
To create bitmap fonts from TrueType fonts
1 Start PrintSet.
2 Make sure that the communications settings are correct.
3 From the Configuration menu, select Fonts or on the toolbar, click the
Font Setup button. The Font Setup dialog box appears:
4 To select a font by font name, click Select Installed Font. Select the
TrueType font name from the list of installed fonts.
To select a font by pathname, click Select Font Path. Select a drive and
a path. From the File name list box, select the TrueType font file
(*TTF).
5 In the Storage Option box, click the Fixed option button.
6 In the Size Option box, click either the Point Size option button or
the Height/Width option button.
7 If you select Point Size, in the Point Size list box, select the size of the
bitmap characters. One point equals 1/72 of an inch.
If you select Height/Width, in the Height box and Width box enter the
height and width (in inches or centimeters) of the bitmap characters.
Note: If you enter 0 for the width, you preserve the aspect ratio of the
font.