Specifications

Appendix D— User-Defined Interface Tables
IPL Programmer’s Reference Manual 233
Escape Print Commands (t = 1)
This table lists the <ESC> commands in the order you must download
them.
Default Escape Command
Hex
Value
Escape Command Description
SYN 16 Set Message Delay
(space) 20 Enter Start/Stop Character
C 43 Select Advanced Mode
D 44 Set Field Decrement
E 45 Select Format
F 46 Select Field
G 47 Select Page
H 48 Transmit Printhead Parameters
I 49 Set Field Increment
L 4C Transmit Label and Gap Length
M 4D Transmit Software Version
Number
N 4E Disable Increment/Decrement
O 4F Transmit Options Selected
P 50 Enter Program Mode
Q 51 Transmit Quantity and Batch
Count
T 54 Enter Test and Service Mode
Z 5A Transmit User-Defined
Command Tables
c 63 Select 86XX Emulation Mode
d 64 Enable Auto-Transmit 2
e 65 Enable Auto-Transmit 3
g 67 Select Direct Graphics Mode
j 6A Enable Auto-Transmit 1
k 6B Disable Auto-Transmit 1, 2, and 3
m 6D Transmit Static RAM Usage
p 70 Transmit Configuration
Parameters
u 75 Transmit User-Defined Characters
v 76 Transmit Font
x 78 Transmit Format
y 79 Transmit Page