Specifications

Chapter 7— IPL Command Reference
IPL Programmer’s Reference Manual 197
Program Mode, Exit
Purpose: Instructs the printer to exit Program mode and enter Print mode. It saves
any format or page currently being edited.
Syntax: R
User-Defined Character, Clear or Create
Purpose: Clears or creates a graphic bitmap.
Syntax: Gn[,name]
Printers:
Printer Default Values for n Notes
All N/A 0 to 99
The ,name parameter is an optional field of up
to eight ASCII characters (not counting the
semicolon) and cannot start with a number.
Notes: If you have already defined graphic n, the printer erases it and redefines it.
User-Defined Character Field, Create or Edit
Purpose: Edits or creates a graphic field.
Syntax: Un[,name]
Printers:
Printer Default Values for n Notes
All n = 0 0 to 199
The ,name parameter is an optional field of up
to eight ASCII characters (not counting the
semicolon) and cannot start with a number.
Notes: The parameters for the default field are listed in the next table.
Parameters for the Default Field
Parameter Syntax Default
Field origin o 0,0
Field direction f 0 degrees
Character rotation r 0 degrees
Height magnification h 1
Width magnification w 1