Specifications

Chapter 7— IPL Command Reference
196 IPL Programmer’s Reference Manual
Point Size, Set
Purpose: Sets the point size that defines the size of the characters in human-readable
fields. You can only use this command in Advanced mode.
Syntax: kn
Printers:
Printer Default Values for n Notes
3240 n = 12 4 - 180
This command works most effectively
on fonts c25, c26, and c27.
3400 n = 12 4 - 288
This command works most effectively
on outline fonts.
3400e n = 12
200 dpi:
3 - 288
400 dpi:
3 - 255
This command works most effectively
on outline fonts.
3440 n = 12 3 - 255
This command works most effectively
on fonts c25, c26, and c27.
3600 n = 12 4 - 288
This command works most effectively
on font c25.
4100 n = 12 4 - 212
This command works most effectively
on fonts c20, c21, and c22.
4400 n = 12 4 - 212
This command works most effectively
on fonts c20, c21, c22, and c25.
44X0 n = 12
4420:
3 - 288
4440:
3 - 255
This command works most effectively
on outline fonts.
4X30 n = 12 4 - 212
This command works most effectively
on fonts c20, c21, c22, and c25.
7421 n = 12 3 - 288
This command works most effectively
on outline fonts.
EasyCoder
F4, PF2i,
PF4i, PM4i
n = 12 4 - 288
This command works most effectively
on outline fonts.
Notes: A point size equals 1/72 inch. A higher point size means larger characters.
Print Line Dot Count Limit, Set
Syntax: vn
Notes: This is a null command and the printer ignores it.