Specifications

Chapter 7— IPL Command Reference
190 IPL Programmer’s Reference Manual
Interpretive Field, Enable or Disable
Purpose: Determines if the interpretive field of the current bar code field prints.
Syntax: in
Printers:
Printer Default Values for n
All n = 0
0 = Disable
1 = Enable with start and stop characters
2 = Enable without start or stop characters
Notes: When you enable the interpretive field, the human-readable information
in the default font (font 0, 7 x 9 standard) prints 2 dots below the bar code
field and is left justified.
Use the I command to edit an interpretive field.
Length of Line or Box Field, Define
Purpose: Defines the length of a line or box. You define the length of a line or box
field in the number of dots.
Syntax: ln
Printers:
Printer Default Values for n
All n = 100 1 to 9999
Notes: In Advanced Mode, a dot is 5 mil for a 200 dpi printer and 2.5 mil for a
400 dpi printer. For the 4X30 printers, a dot is 3.3 mil.