Specifications

Chapter 7— IPL Command Reference
IPL Programmer’s Reference Manual 187
Height Magnification of Bar, Box, or UDC, Define (continued)
Notes: For human-readable fields, graphics, and the POSTNET symbology, n
represents the vertical magnification of the character bitmap.
If you set n to a number that is too large, the printer uses the highest value
it can support.
In Advanced Mode, a dot is 5 mil for a 200 dpi printer and 2.5 mil for a
400 dpi printer. For the 4X30 printers, a dot is 3.3 mil.
Human-Readable Field, Create or Edit
Purpose: Edits or creates a human-readable field.
Syntax: Hn[,name]
Printers:
Printer Default Values for n Notes
All n = 0 0 - 199
The ,name parameter is an optional field.
You can use eight ASCII characters (not
counting the semicolon) and cannot start
with a number.
Notes: The parameters for the default field are listed in the next table.
Parameters for the Default Field
Parameter Syntax Default
Field origin o 0,0
Field direction f 0 degrees
Character rotation r 0 degrees
Font c 7 x 9 standard
Height magnification h 2
Width magnification w 2
Pitch g Disabled
Point k Disabled
Border b Disabled
Data origin d Print mode
Data length 30