Specifications

Chapter 7— IPL Command Reference
IPL Programmer’s Reference Manual 167
Box Field, Create or Edit (continued)
Notes: The next table describes the box field parameters.
Box Field Parameter Descriptions
Parameter Syntax Default
Field origin o 0,0
Field direction f 0 degrees
Box length l 100
Box height h 100
Box width w 1
Character Bitmap Origin Offset, Define
Purpose: Defines the offset, to the right, of all characters in a font. If you define each
character’s width in columns, with the first column numbered 0, then the
origin of each character is at the column with the same number as n. For
example, n = 2 shifts the character origins over two columns to the right.
Syntax: Xn
Printers:
Printer Default
Values
for n Notes
3240 n = 0 0 - 599 Use this command only with bitmap fonts.
3400A
3400B
n = 0 0 - 599 Use this command only with bitmap fonts.
3400C
3400D
3400e
n = 0 0 - 800 Use this command only with bitmap fonts.
3440 n = 0 0 - 800 Use this command only with bitmap fonts.
3600 n = 0 0 - 599 Use this command only with bitmap fonts.
4100 n = 0 0 - 599 Use this command only with bitmap fonts.
4400 n = 0 0 - 599 Use this command only with bitmap fonts.
44X0 n = 0 0 - 800 Use this command only with bitmap fonts.
4X30 n = 0 0 - 599 Use this command only with bitmap fonts.
7421 n = 0 0 - 800 Use this command only with bitmap fonts.
EasyCoder
F4, PF2i,
PF4i,
PM4i
n = 0 0 - 800 Use this command only with bitmap fonts.