Specifications

Chapter 7— IPL Command Reference
158 IPL Programmer’s Reference Manual
Bar Code, Select Type (continued)
Values for m1 Conforming to the Provider Standard
m1 Description
3 Single format.
4 First data format.
5,m2 Selects HIBC Code 128. Second data format. The linkage
character comes from ,m2, which is the field identifier.
6 Selects HIBC Code 128. Multiple data format.
Data Matrix Symbology Versions ECC-100 and ECC-200
c17[,m1][,m2][,m3,m4[,m5,m6]]
Data Matrix is a 2D matrix symbology made up of square modules
arranged within a perimeter finder pattern. The finder pattern is a
perimeter to the data region and is one module wide. Two adjacent sides
are solid dark lines. These lines are used to define physical size, orientation,
and symbol distortion. Intermec supports these two versions of Data
Matrix: ECC-100 and ECC-200. Use ECC-200 for new applications.
Data Matrix Default Parameters
Parameter Default Description
,m1 200 ECC-200
,m2 0 Square
,m3 0 Position of current symbol in group
,m4 ,m3 Total number of symbols in group
,m5 1 File identifier
,m6 1 File identifier
,m1 is a three-digit number that selects the Data Matrix version. Possible
values are:
• 100 (ECC-100)
• 200 (ECC-200)
Note: The EasyCoder F4, Pf2i, PF4i, and PM4i printers only support
,m1 = 200.
,m2 is a one-digit value that indicates whether your symbol will be square
or rectangular. The amount of data you enter determines the size of the
symbol. Possible values are:
• 0 = square
• 1 = rectangular