Specifications

Chapter 7— IPL Command Reference
IPL Programmer’s Reference Manual 143
Bar Code, Select Type (continued)
Interleaved 2 of 5
c2[,m]
The default for m is 0.
Values for m
m Description
0 Selects Interleaved 2 of 5. No check digit.
1 Selects Interleaved 2 of 5. Printer enters check digit.
2 Selects Interleaved 2 of 5. Host enters check digit.
Note: The printer adds a zero to character strings that are odd in length.
Code 2 of 5
c3[,m]
The default for m is 0.
Values for m
m Description
0 Selects Code 2 of 5. 3-bar start/stop code.
1 Selects Code 2 of 5. 2-bar start/stop code.
Codabar
c4[,m]
The default for m is 0.
Values for m
m Description
0 Selects Codabar. Host enters start/stop codes and printer
verifies.
1,x,y Selects Codabar. Printer enters start code x and stop code y.
The values for x and y can range from A to D and from a to d.
Valid start/stop characters range from A to D and from a to d. You can
define them as part of the bar code field, or you can download them as
part of the print data. Start/stop characters sent down with printer data
override the characters defined by the bar code field.