Specifications

Chapter 7— IPL Command Reference
138 IPL Programmer’s Reference Manual
Self-Strip, Enable or Disable (continued)
Printer Default Values for n Notes
4X30 n = 0
0 = disabled
1 = enabled
7421 n = 0
0 = disabled
1 = enabled
EasyCoder
F4, PF2i,
PF4i, PM4i
n = 0
0 = disabled
1 = enabled
Serial Port Configuration, Set
See the Communication Port Configuration, Set command.
Slash Zero, Enable or Disable
Purpose: Determines if the regular zero is replaced with a slashed zero.
Syntax: <SI>zn
Printers:
Printer Default Values for n
3400e n = 0
0 = disabled
1 = enabled
44X0e n = 0
0 = disabled
1 = enabled
EasyCoder
PF4i, PM4i
n = 0
0 = disabled
1 = enabled
Notes: This command only works if the Printer Language, Select command <SI>1
is set to 0 (USA). Also, it does not apply to OCR fonts 23 and 24.