Specifications

Chapter 7— IPL Command Reference
136 IPL Programmer’s Reference Manual
Printhead Pressure, Set
Purpose: Compensates for variations in the thickness of label stock.
Syntax: <SI>Hn
Printers:
Printer Default Values for n Notes
4400 n = 0
0 = Low printhead pressure
1 = High printhead pressure
If your labels are slipping, or
you notice that the pressure is
too light, try changing the
pressure to the other setting.
Printhead Test Parameters, Set
Purpose: Sets the printhead test parameters.
Syntax: <SI>Un[,m][,p][,q]
where:
n determines whether printing continues if the printhead test sends a
warning.
,m is the positive threshold of the percentage of the allowable deviation
in resistance.
,p is the negative threshold of the percentage of the allowable deviation
in resistance.
,q specifies how often (in terms of the number of labels printed) to
automatically run the printhead resistance test.
Printers:
Printer Defaults Values for n ,m ,p and ,q Notes
4400
n = 0
m = 45
p = 45
q = 0
n = 0 Printing continues
when warning occurs
n = 1 Printing stops
when warning occurs
,m A number from 45 to 10
,p A number from 45 to 10
,q A number from 0 to 9999.
Setting q = 0 disables the test.
This command is
effective upon
execution.