Specifications

Chapter 7— IPL Command Reference
IPL Programmer’s Reference Manual 135
Printhead Loading Mode, Select
Purpose: Selects the printhead loading mode that affects how the whole image prints
on the label. Mirror Printing mode reverses the order in which data loads
into the printhead. Inverse Printing mode causes all pixels that are white to
invert to black and vice versa.
Syntax: <SI>hn[,m]
Printers:
Printer Defaults Values for n Values for ,m
3400C
3400D
3400e
n = 0
,m = 0
0 = Selects normal
printing
1 = Selects Mirror Printing
mode
0 = Selects normal printing
1 = Selects Inverse Printing
mode
3440 n = 0
,m = 0
0 = Selects normal
printing
1 = Selects Mirror Printing
mode
0 = Selects normal printing
1 = Selects Inverse Printing
mode
44X0 n = 0
,m = 0
0 = Selects normal
printing
1 = Selects Mirror Printing
mode
0 = Selects normal printing
1 = Selects Inverse Printing
mode
7421 n = 0
,m = 0
0 = Selects normal
printing
1 = Selects Mirror Printing
mode
0 = Selects normal printing
1 = Selects Inverse Printing
mode
EasyCoder
F4, PF2i,
PF4i, PM4i
n = 0
,m = 0
0 = Selects normal
printing
1 = Selects Mirror Printing
mode
0 = Selects normal printing
1 = Selects Inverse Printing
mode
Note: The printhead is not under warranty if you use Inverse Printing mode for
batch printing. Intermec does not recommend using Inverse Printing
mode for batch printing. For best results with Inverse Printing mode, use a
maximum print density of 35 percent.