Specifications

Chapter 7— IPL Command Reference
134 IPL Programmer’s Reference Manual
Printer Language, Select (continued)
Printer Default Values for n
44X0 n = 0 0 - 20, 30 - 33
4X30 n = 0 0 - 10
7421 n = 0 0 - 10
EasyCoder F4,
PF2i, PF4i,
PM4i
n = 0 0 - 20
Notes: You can only select one printer language per print job.
Bitmap user-defined fonts (including bitmap TrueType) do not use code
pages. If your label format requires several language fonts, you can
• bitmap the TrueType fonts. For help, see “Creating Bitmap Fonts From
TrueType Fonts” in Chapter 2.
• create your own bitmap fonts. For help, see “Creating User-Defined
Bitmap Fonts” in Appendix C.
Resident fonts (those that were installed at the factory) use language
selections 0 through 10. The default setting will probably provide all the
special characters you will need, but you may want to look through the
page tables in Appendix B, “Character Sets,” to determine if one of the
other languages (0 through 10) would be more suitable. Code pages 11
through 33 do not work with resident fonts.
If you are using a TrueType font (not bitmap), you must match the code
page to your language needs. Do not use languages 0 through 10 with
scaleable TrueType fonts.
If you are using a downloaded scaleable (that is, not bitmap) Japanese,
Chinese, or Korean TrueType font, you must first locate the correct code
page and download it to your printer. (All others are already stored in
your printer.) Select the corresponding code page using the Printer
Language, Select command. See Chapter 2 for more information.
See Chapter 2 for more information about downloading fonts and code
pages. See Appendix B for tables of the various character sets.