Specifications

Chapter 7— IPL Command Reference
132 IPL Programmer’s Reference Manual
Print Speed, Set
Purpose: Sets the print speed.
Syntax: <SI>Sn
where n specifies the print speed.
Printers:
Printer Default Values for n
3240 n = 30 20, 30, or 40 (corresponding to 2, 3, or 4 ips)
3400A
3400B
n = 30 20, 30, 40, or 50
3400C
3400D
n = 30 20, 30, 40, 50, or 60
3400e
200 dpi:
20, 30, 40, 50, 60, 70, 80 (no self-strip)
20, 30, 40, 50, 60 (with self-strip)
400 dpi:
20, 30, 40, 50, 60, 70, 80 (no self-strip)
20, 30, 40, 50 (with self-strip)
3440 n = 30 20, 30, 40, or 50
3600 n = 30 20, 30, 40, or 50
4100 n = 30 20, 30, 40, or 50
4400 n = 35
5 mil printhead:
A number from 25 to 100 in multiples of 5.
6.5 mil printhead:
A number from 25 to 85 in multiples of 5.
44X0 n = 30
20, 30, 40, 50, 60, 70, 80, or 100 (no self-
strip)
20, 30, 40, 50, 60, 70, or 80 (self-strip)
4X30 n = 35 20 to 80 in multiples of 5
7421 n = 20 20
EasyCoder
F4, PF2i,
PF4i,
PM4i
n = 50 40, 50, 60, 70, 80