Specifications

Chapter 7— IPL Command Reference
IPL Programmer’s Reference Manual 129
Number of Image Bands, Set
Purpose: Selects the number of image bands.
Syntax: <SI>In
where n is the number of image bands.
Printers:
Printer Default Values for n Notes
3240 n = 3 2 to 5 if the printer has 128K of static RAM.
2 to 7 if the printer has expanded RAM.
This command
is effective upon
execution.
3400 n = 3 2 to 6 if the printer has 32K of static RAM.
2 to 12 if the printer has expanded RAM
This command
is effective upon
execution.
3400e n = 3 200 dpi:
2 to 20 with the standard 1 MB of DRAM.
400 dpi:
2 to 9 with the standard 1 MB of DRAM.
2 to 20 if the printer has expanded memory.
This command
is effective upon
execution.
3440 n = 3 2 to 9 if the printer has 1 MB of DRAM.
2 to 20 if the printer has expanded memory.
This command
is effective upon
execution.
3600 n = 3 2 to 13 if the printer has 128K of static
RAM.
2 to 25 if the printer has expanded RAM.
This command
is effective upon
execution.
4100 n = 3 2 to 6 if the printer has 32K of static RAM.
2 to 12 if the printer has expanded RAM.
This command
is effective upon
execution.
4400 n = 3 2 to 10 if the printer has 512K of RAM. This command
is effective upon
execution.
44X0 n = 3 4420:
2 to 20 with the standard 1 MB of DRAM.
4440:
2 to 9 with the standard 1 MB of DRAM.
2 to 20 if the printer has expanded memory.
This command
is effective upon
execution.
7421 n = 3 2 to 20 if the printer has 512K of DRAM. This command
is effective upon
execution.