Specifications

Chapter 7— IPL Command Reference
IPL Programmer’s Reference Manual 123
Interlabel Ribbon Save, Enable or Disable
Purpose : Enables or disables the interlabel ribbon save feature on the 4100 printer.
Syntax: <SI>sn
Printers:
Printer Default Values for n Notes
4100 n = 0
0 = Disable interlabel ribbon save
1 = Enable interlabel ribbon save
If you do not have the
ribbon save option installed,
the printer ignores this
command.
Label Rest Point, Adjust
Purpose: Adjusts the point at which labels stop for removal. Use this command for
self-strip and cutter applications.
Syntax: <SI>fn
where n specifies the label stop point.
Printers:
Printer Default Values for n
3240 n = 0 -30 (farthest back) to +30 (farthest forward) in 5 mil increments
3400 n = 0 -30 (farthest back) to +30 (farthest forward) in 5 mil increments
3400e n = 0 -30 (farthest back) to +30 (farthest forward) in 5 mil increments
3440 n = 0 -30 (farthest back) to +30 (farthest forward) in 5 mil increments
3600 n = 0 -30 (farthest back) to +30 (farthest forward) in 5 mil increments
4100 n = 0 -30 (farthest back) to +30 (farthest forward) in 5 mil increments
4400 n = 0 -30 (farthest back) to +30 (farthest forward) in 5 mil increments
44X0 n = 0 -30 (farthest back) to +30 (farthest forward) in 5 mil increments
4X30 n = 0 -20 (farthest back) to +20 (farthest forward)
7421 n = 0 -30 (farthest back) to +30 (farthest forward) in 5 mil increments
EasyCoder
F4, PF2i,
PF4i,
PM4i
n = 0 -30 (farthest back) to +30 (farthest forward) in 5 mil increments
Notes: You can also set this command by using the control panel or Test and
Service DIP switches. For help, see your printer user’s manual.