Specifications

Chapter 7— IPL Command Reference
122 IPL Programmer’s Reference Manual
IBM Language Translation, Enable or Disable
Purpose: Turns the IBM language translation feature on or off.
Syntax: <SI>in
where n enables or disables IBM translation.
Printers:
Printer Default Values for n Notes
All n = 0
0 = Disable IBM translation
1 = Enable IBM translation
All printers support this
command the same way.
Notes: This feature allows IBM compatible characters to replace standard ASCII
characters based on the current printer language (see your printer user’s
manual for international character sets). This command overrides the
language translation based on the current printer emulation.
Intercharacter Delay, Set
Purpose: Sets the intercharacter delay. The intercharacter delay is the time delay
between characters in a message the printer transmits.
Syntax: <SYN>n
where n is the intercharacter delay in milliseconds.
Printers:
Printer Default Values for n Notes
All except the
EasyCoder F4,
PF2i, PF4i,
and PM4i
n = 0 0 to 9999
All printers support this command
the same way.