Specifications

Chapter 7— IPL Command Reference
IPL Programmer’s Reference Manual 121
End-of-Print Skip Distance, Set (continued)
Printers:
Printer Default Values for n
3240
n = 0 Label Stock mode
n = 118 Continuous Stock mode
0 to 9999 in 5 mil increments
3400
n = 0 Label Stock mode
n = 118 Continuous Stock mode
0 to 9999 in 5 mil increments
3400e
n = 0 Label Stock Mode
n = 123 Continuous Stock mode
0 to 9999 in 5 mil increments
3440
n = 0 Label Stock mode
n = 123 Continuous Stock mode
0 to 9999 in 5 mil increments
3600
n = 0 Label Stock mode
n = 118 Continuous Stock mode
0 to 9999 in 5 mil increments
4100
n = 0 Label Stock mode
n = 118 Continuous Stock mode
0 to 9999 in 5 mil increments
4400
n = 0 Label Stock mode
n = 141 Continuous Stock mode
0 to 9999 in 5 mil increments
44X0
n = 0 Label Stock Mode
n = 132 Continuous Stock mode
0 to 9999 in 5 mil increments
4X30
n = 0 Label Stock mode
n = 94 Continuous Stock mode
0 to 9999 in 5 mil increments
7421
n = 0 Label Stock mode
n = 160 Continuous Stock mode
0 to 9999 in 5 mil increments
EasyCoder
F4, PF2i,
PF4i
n = 0 Label Stock mode
n = 103 Continuous Stock mode
PM4i
n = 0 Label Stock mode
n = 100 Continuous Stock mode
Notes: To advance the label out to the tear bar in label stock mode, set n to the
Continuous Stock mode value.
If you enter a value for n, it applies to both Continuous mode and Label
Stock mode, regardless of the mode in which you enter the value.
If you do not specify a value for n, the <SI>D command returns the
printer to the default.
This command is ineffective in self-strip applications.