Specifications

Chapter 7— IPL Command Reference
118 IPL Programmer’s Reference Manual
Cutter, Enable or Disable
Purpose: Turns the cutter feature on or off if the cutter option is installed. Reset the
printer after sending this command.
Syntax: <SI>cn
where n enables or disables the cutter.
Printers:
Printer Default Values for n Notes
3400C
3400D
n = 0
0 = Disables the cutter
1 = Enables the cutter
3400e n = 0
0 = Disables the cutter
1 = Enables the cutter
4100 n = 0
0 = Disables the cutter
1 = Enables the cutter
4400 n = 0
0 = Disables the cutter
1 = Enables the cutter
44X0 n = 0
0 = Disables the cutter
1 = Enables the cutter
4X30 n = 0
0 = Disables the cutter
1 = Enables the cutter
7421 n = 0
0 = Disables the cutter
1 = Enables the cutter
EasyCoder
F4, PF2i,
PF4i, PM4i
n = 0
0 = Disables the cutter
1 = Enables the cutter
This option is available on
the EasyCoder F4 with IPL
version 1.4.
Dark Adjust, Set
Purpose: Sets the dark adjust command. This command controls the print darkness
on the labels.
Syntax: <SI>dn
where n specifies the darkness setting.
Printers:
Printer Default Values for n Notes
All n = 0 -10 to +10 (in increments of 1)
This command changes
the configuration setting.
Notes: The darkest setting is +10 (darkest) and the lightest setting is -10 (lightest).