Specifications

Chapter 7— IPL Command Reference
116 IPL Programmer’s Reference Manual
Communication Port Configuration, Set
Purpose: Sets the serial and parallel port configuration.
Syntax: <SI>P[n1][,n2][,n3][,n4][,n5][,n6]
where:
n1 sets the baud rate, n2 sets the parity, n3 sets the data bits, n4 sets the
protocol, and n5 sets the Multi-Drop address (if you are using Multi-
Drop).
n6 sets the parallel port mode.
Printers:
Printer Defaults n1 Values
n2
Values
n3
Values n4 Values n5 Values n6 Values
7421
n1 = 3
n2 = 0
n3 = 1
n4 = 0
n5 = A
n6 = 0
0 = 1,200
1 = 2,400
2 = 4,800
3 = 9,600
4 = 19,200
0 = None
1 = even
2 = odd
0 = 7 bits
1 = 8 bits
0 =
XON/XOFF
1 = Intermec
XON/XOFF
2 = Intermec
Standard
3 = Polling
Mode D
A - Z, 0 - 5
0 = Centronic
Mode
1 = 1284 Nibble
Mode
EasyCoder
F4, PF2i,
PF4i, PM4i
n1 = 3
n2 = 0
n3 = 1
n4 = 0
0 = 1,200
1 = 2,400
2 = 4,800
3 = 9,600
4 = 19,200
5 = 38,400
6 = 57,600
7 = 115,200
0 = None
1 = even
2 = odd
0 = 7 bits
1 = 8 bits
0 = XON/XOFF
2 = Intermec
Standard
N/A N/A