Specifications

Chapter 7— IPL Command Reference

IPL Programmer’s Reference Manual 113

Configuration Commands

Use Configuration commands to set parameters for configuration features

and to enable or disable options.

Configuration commands are effective when the printer is in Print mode.

You can switch to Print mode with this command:

For help downloading Configuration commands to the printer, see

“Sending IPL Commands to the Printer” in Chapter 1.

Note: You must precede each string of commands with the start of

message character <STX> and follow it with the end of message character

<ETX>. The printer terminates a configuration command when it receives

the next command in the message.

After reconfiguring your printer, you must cycle power or reset the printer

for the commands to become effective unless specified otherwise; however,

when configuring the 3400e, 4420, and 4440 printers, do not cycle power

using the hardware power switch. You must send the Reset command

(<BS> character) after issuing the new configuration command or

commands.