Specifications

Chapter 7— IPL Command Reference
IPL Programmer’s Reference Manual 109
Page, Transmit (continued)
Notes: If you send <ESC>y to the printer without specifying a value for the n
parameter, the printer uploads the entire page directory. The directory
appears in this format:
[IDnumber] [name] [type] [storage size]<CR><LF>
where:
IDnumber
is the page number that was specified by n in the command
that created the page.
name is the optional page name that may have been specified by
,name in the command that created the page.
type is 1 for pages.
storage size is always 0 for a page.
The target printer remains in Advanced mode. The printer generates an
error code (26) if you enter an invalid number.
Print
Purpose: Prints the current page or format with previously entered data.
Syntax: <ETB>
Printhead Parameters, Transmit
Purpose: Transmits the number and size of dots in the printhead back to the host.
Syntax: <ESC>H
Notes: Here is an example of what you can expect to see: 896,5.0.
Program Mode, Enter
Purpose: Causes the printer to enter Program mode for the purpose of creating or
editing pages, formats, fonts, or graphics.
Syntax: <ESC>P
Notes: When this command is executed, you lose all previously entered data.