Specifications

Chapter 7— IPL Command Reference
IPL Programmer’s Reference Manual 105
Memory Usage, Transmit
Purpose: Uploads information on the amount of memory installed or allocated and
the amount of memory not being used.
Syntax: <ESC>mn
where n specifies the type of the memory.
Printers:
Printer Default Values for n
3400e n = 0
0 = Transmits the amounts of memory that are available
and free.
1 = Transmits the amount of installed SRAM, DRAM, or
Flash RAM.
3440 n = 0
0 = Transmits the amounts of memory that are available
and free.
1 = Transmits the amount of installed SRAM, DRAM, or
Flash RAM.
44X0 n = 0
0 = Transmits the amounts of memory that are available
and free.
1 = Transmits the amount of installed SRAM, DRAM, or
Flash RAM.
EasyCoder
F4, PF2i,
PF4i, PM4i
n = 0
0 = Transmits the amounts of memory that are available
and free.
1 = Transmits the amount of installed SRAM, DRAM, or
Flash RAM.
Notes: The printer uploads the amount of total storage memory available for
formats, fonts, and UDCs. The amount of available RAM not being used
follows the amount of total RAM. The printer separates the numbers by a
comma: 32,10.
This command was called Storage Area Usage, Transmit in older versions
of the 3240, 3400, and 3600 printer manuals. This command is called
Static RAM Usage, Transmit in the 4400 printer manual.