Specifications

Chapter 7— IPL Command Reference
IPL Programmer’s Reference Manual 101
Font, Transmit (continued)
If you send <ESC>v to the printer without specifying a value for the n
parameter, the printer (except for the 3400A, 3400B, 3600, and 4400)
uploads the entire user-defined fonts directory. The directory appears in
this format:
IDnumber, name, type, storage size<CR><LF>
where:
IDnumber
is the font number that was specified by n in the
command that created the user-defined font.
name is the optional font name that may have been specified by
,name in the command that created the user-defined font.
type is 200 for Bitmap fonts, 300 for Speedo outline fonts, or
301 for TrueType fonts.
storage size
is 0 for resident fonts.
Always transmit fonts in Advanced mode.
The target printer remains in Advanced mode. The printer generates an
error code (27) if you enter an invalid number.
Form Feed
Purpose: Feeds a label out to the next print point.
Syntax: <FF>
Notes: If you use self-strip, the printer feeds out one blank label to the strip pin,
skipping an entire label. If you use batch operation with die-cut label
stock, the label moves to the tear bar.
If you use continuous label stock, the label stock moves the same amount
as the end-of-print skip distance.
Format, Select
Purpose: Selects a format for data entry or printing.
Syntax: <ESC>En[,m]
where n is the numeric format ID and ,m specifies to reimage only
changed fields.