Specifications

Chapter 7— IPL Command Reference
100 IPL Programmer’s Reference Manual
Font, Transmit
Purpose: Uploads a font from the printer in the form of commands and data the
printer receives to create the font.
Syntax: <ESC>vn
where n is the font ID number.
Printers:
Printer Default Values for n
3240 None 0 to 28, 30 to 41, and 50 to 56 with the Kanji option
3400A None 0 to 24
3400B
3400C
3400D
None 0 to 25, 30 to 41, and 50 to 56 with the Kanji option
3400e None 0 to 28, 30 to 41 and 50 to 56 with the Kanji option
3440 None 0 to 28, 30 to 41, and 50 to 56 with the Kanji option
3600 None 0 to 25, 30 to 41, and 50 to 56 with the Kanji option
4100 None 0 to 24
4400 None 0 to 25
44X0 None 0 to 28, 30 to 41, and 50 to 56 with the Kanji option
4X30 None 0 to 28, 30 to 41
7421 None 0 to 28, 30 to 41
EasyCoder
F4, PF2i,
PF4i, PM4i
None 0 to 28, 30 to 41
Notes: You can set n to a number from 0 to 56, depending on the fonts your
printer supports. The font names are listed in the “Values for n” table on
page 178.