Specifications

Chapter 7— IPL Command Reference
94 IPL Programmer’s Reference Manual
Command Terminator 2
Purpose: Terminates the current command.
Syntax: <LF>
Configuration Parameters, Transmit
Purpose: Uploads the current configuration commands from the printer.
Syntax: <ESC>p
Notes: The printer transmits only the configuration parameters that you can set
from the host.
Use this command to view, edit, or copy the current configuration
command settings.
See your printer user’s manual for a list of the configuration parameters
that the printer uploads to the host.
Cut
Purpose: Advances the label out to the cutter and cuts the label stock.
Syntax: <SO>
Notes: This command is executed only if the cutter is installed but not enabled.
Use this command only after you have printed a batch of labels.
Data Shift – International Characters
Purpose: Allows you to enter selected command characters as data.
Syntax: <SUB> or <DLE>
Notes: In Emulation mode, this command shifts the next character (if not a
control character) into the upper character bank (setting the eighth bit to
1) to print international characters.
This command lets you enter selected command characters as data instead
of commands in both Advanced and Emulation mode. For example, use
this command to enter a <GS> or <CR> as data in a bar code or text field.