Specifications

Chapter 7— IPL Command Reference
IPL Programmer’s Reference Manual 91
Advanced Mode, Select
Purpose: Instructs the printer to operate in Advanced mode. Advanced mode is the
default mode; the alternative operating mode is Emulation mode.
Syntax: <ESC>Cn
where n specifies the dot size.
Printers:
Printer Default Values for n Notes
3240 n = 1
0 = 5.0 mil (0.005 inch) dot size
1 = 2.5 mil (0.0025 inch) dot size
3400e
200 dpi: N/A
400 dpi: n = 1
0 = 5.0 mil (0.005 inch) dot size
1 = 2.5 mil (0.0025 inch) dot size
The n parameter is
not available on
the 3400e with the
200 dpi option.
3440 n = 1
0 = 5.0 mil (0.005 inch) dot size
1 = 2.5 mil (0.0025 inch) dot size
44X0
4420: N/A
4440: n = 1
0 = 5.0 mil (0.005 inch) dot size
1 = 2.5 mil (0.0025 inch) dot size
The n parameter is
not available on
the 4420.
Notes: The field pointer designates the first field in format 0. Page 0 is the default
page.
You will lose all previously host-entered data when you switch operating
modes.