Specifications

Chapter 7— IPL Command Reference
88 IPL Programmer’s Reference Manual
Status Dump
Purpose: Causes the printer to upload all current printer status.
Syntax: <VT>
Printers:
Printer Notes
3240
The 3240 printer does not upload either <BS> Takeup reel full or
<SO> Printhead test fail.
3400 The 3400 printer does not upload <US> Label path open, <BS>
Takeup reel full, or <SO> Printhead test fail.
3400e The 3400e printer does not upload either <BS> Takeup reel full or
<SO> Printhead test fail. Only the 400 dpi version uploads <US> label
path open.
3440 The 3440 printer does not upload either <BS> Takeup reel full or
<SO> Printhead test fail.
3600 The 3600 printer does not upload <US> Label path open, <BS>
Takeup reel full, or <SO> Printhead test fail.
4100 The 4100 printer does not upload <US> Label path open, <BS>
Takeup reel full, or <SO> Printhead test fail.
4400 The 4400 printer does not upload <BS> Takeup reel full.
44X0 The 4420 and 4440 printers do not upload either <BS> Takeup reel
full or <SO> Printhead test fail.
4X30 The 4630 and 4830 printers do not upload <SO> Printhead test fail.
7421 The 7421 printer does not upload <US> Label path open, <BS>
Takeup reel full, or <SO> Printhead test fail.
EasyCoder
F4, PF2i,
PF4i,
PM4i
These printers do not upload either <BS> Takeup reel full or <SO>
Printhead test fail.
Notes: The printer uploads the status in the following order of priority for
Intermec Standard Protocol. See Appendix D for codes for other
protocols.
<GS> Buffer already full <BS> Takeup reel full
<SO> Printhead test fail <SI> Printhead hot
<US> Label path open <FS> Label at strip pin
<US> Ribbon fault <DC1> Skipping
<EM> No label stock <DC1> Printing
<DC3> Buffer now full <DC1> Ready