Specifications

Chapter 7— IPL Command Reference

IPL Programmer’s Reference Manual 87

Label and Gap Length, Transmit

Purpose: Transmits the label and gap length as measured by the number of 5 mil

increments.

Syntax: <ESC>L

Notes: Label length refers to the length of the label currently being processed. If

the label is longer than the distance between the label sensor and the

printhead, the printer transmits the length of the previous label.

If you select continuous stock, the printer transmits the length defined by

the Maximum Label Length, Set command (<SI>L).

Remaining Quantity and Batch Count, Transmit

Purpose: Uploads the remaining quantity and batch counts for the current print

job.

Syntax: <ESC>Q

Reset

Purpose: Executes a printer power-up reset immediately.

Syntax: <DLE>

Notes: The printer erases all data and commands in the input buffer upon reset.

In the following example, the first DLE is a transparency character. It

instructs the printer to use the <DLE> as a reset command.