User`s manual

UBI EasyCoder 101 – User's Manual
6
PAPER LOAD
Tear-Off
MADE IN SWEDEN
Type
Art. No.
Ser. No.
115/230 V 2.6/1.3 A 50–60 Hz
TA
PULL/TIREZ
Power
Ready
EasyCoder 101
Error
UBI
UBI
Remove the dispenser shaft
before permanently switching to
Tear-Off operation
1 Turn the printhead lift lever clockwise to vertical position.
2 Fit a new paper roll on the paper supply spool and push the roll
inwards as far as it will go.
3 Thread the paper above the take-up spool and underneath the
three guide shafts.
4 Thread the paper past the print roller.
5 Adjust the green paper guide so that the paper is guided with a
minimum of play.
6 Turn the printhead lift lever counter-clockwise to horizontal
position.
7 Feed out at least one label.
To tear off the paper, pull it upwards.