Smart Eleven New service using BLE function Data analysis service using GPS tracker for Soccer players will be open soon. In the mean time, This version of app will use BLE function for GPS data transferring from GPS tracker to demonstrate the ‘soccer game analysis’ service on the Smarteleven app. cs@soccer-bee.
Overview Soccer players are playing soccer with our GPS tracker. After the game, the data in the tracker be sent to our server via Smarteleven app. In this process we use BLE function for receiving data from the GPS tracker. When data transferring process using BLE done, App starts analyzing user’s performance during the game based on the GPS data.
STEP 01 Turn on the GPS tracker Press the button for over 2sec to turn on the device. When succeed, blue LED comes up and blink every 1 sec.
STEP 02 Pairing Touch the BLE connection button on the app to proceed the pairing process with GPS tracker. The location of BLE connection button is top left of ‘Game Analysis’ page on the app. 2 ※ Attention point Multiple GPS trackers should not be close each other when pairing process. App will not detect any device if more than two trackers are found. Distance needed at least 2~3 meters.
STEP 02 Pairing App will detect closest GPS tracker automatically. When app found a single device using BLE, touch the register button on the app to complete BLE pairing process. 3 LED turns into green when BLE connection succeeded.
STEP 02 Pairing There will be no game data when you connect the device with your app first time. Touch back button on the app to get out the BLE pairing page or exit from Smarteleven app to finish BLE pairing process.
STEP 03 Play soccer with GPS tracker(SOCCERBEE POD) After finishing pairing process, LED blinks every 1sec when GPS signal captured. Now data logging starts and you play the game with the device. GPS tracker should be secured in the back pocket of our SOCCERBEE vest. You do not need to do anything from now, just focus on the game until the match finished.
STEP 04 Data transferring via BLE After the game, start Smarteleven app and touch the BLE connection button on the app. 2 (STEP 02, pairing process can be done just before data transferring process. It is up to users.
STEP 04 Data transferring via BLE GPS data will be transferred via BLE through the app. This will take approximately 1 to 3 minutes according to the performance of user’s smart phone. 3 When data transferring done, Match info page will come up automatically so you can enter any information about the match.
STEP 05 Enter the match information After finishing entering all the information needed for game analysis, touch the ‘Start analyzing’ button. Erase all the data ( Erased data will not be restored. ) Start / end time logged in the GPS tracker. If you want to analyze team performance, you should be registered in the identical team. 1 2 Enter the number of session and position information for each session. Position info will affect the rate of your performance.
STEP 06 Check the results !! The results are offered for the whole game overview and for the each sessions. Out from the analysis page Overview Sessions Test #1 Test #1 Re-enter game information or delete the whole data.
STEP 06 Check the results !! > Overview You can figure out the whole movements during the game. Test #1 Play sectors Check the graph about Distance run / Top speed / Sprint num along with time in every single seconds. Touch the empty space on the pitch Attack sectors Drag to the time you want to look into specifically. Play/ Pause Move to the initial time of each sessions. Stat comparison with your teammates all together.
STEP 06 Check the results !! > Sessions You can figure out the performance at each session and compare it with your teammates. Touch session button to move to each session. Test #1 Touch the player compared to terminate the comparison. Touch any area on the pitch during comparision. TOP Speed Touch the bar of player you want to compare.
UbeesLab SOCCERBEE POD Manual(ver 1.1) Package - SOCCERBEE POD - Mini USB Cable Features - Multifunction Button - Mini USB Port - Multifunction LED Technical Specification - Product Name : SOCCERBEE POD - Operating Temperature : -20 ~ +50 °C - Battery : 500mAh, Lithium-Polymer, 3.
How To Use a. Pair SOCCERBEE POD with your phone : Open SOCCERBEE app and create your account. Use the app to search for your POD. When the app finds yours (check the serial number), press the button on the app to complete the pairing process. b. Data Logging : Turn on the POD and put it in the vest before game starts. c. Data transferring & analysis : After the game, start analyzing process with the app. Press data transfer button on the app and wait until the transferring process completed.
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Thank you.
