User`s guide

Ubee Interactive Deploying and Troubleshooting the Wireless Network
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014 83
Steps
To configure the modem as a bridge:
1. Click Wireless from the main menu.
2. Click Bridging from the left side menu. Field descriptions are listed below the screen
example.
9.7 Deploying and Troubleshooting the Wireless Network
Use the information in this section to help you understand, deploy, and troubleshoot your
wireless environments:
 Understanding Received Signal Strength on page 83
 Estimating Wireless Cable Modem to Wireless Client Distances on page 84
 Selecting a Wireless Channel on page 87
Understanding Received Signal Strength
Received signal strength (RSSI) is measured from connected wireless client devices to
the wireless cable modem. This value can significantly impact wireless
speeds/performance. It is determined by:
 Materials (for example, open air, concrete, trees)
 Distance between wireless clients and the wireless cable modem
 Wireless capabilities of the client devices
Label Description
Wireless Bridging Enables or disables bridging.
Remote Bridges Defines the MAC addresses of other wireless access points that
you want to establish a bridge to and from. These access points
must also have bridging enabled.
Apply Saves all changes.