User`s guide

Ubee Interactive Using the Wireless Radio Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014 69
Label Description
Wireless Interfaces Displays the wireless name (SSID) for the DVW326 or uses
the default. Refer to Understanding Default Values and Logins
on page 9 for more information on the SSID.
Wireless Displays the wireless radio’s status, Enabled or Disabled.
Country Defines the country where this device is located. Set by
default to Q1.
Output Power Output power setup can be one of the following 4 options:
25%, 50%, 75%, or 100%.
802.11 Band Displays the 802.11 band (2.4GHz).
802.11 n-mode Sets the wireless networking standard.
By default it is set to Auto for 802.11n mode. This is the
preferred mode, as it has a significant increase in the
maximum raw OSI physical layer data rate from 54 Mbit/s to a
maximum of 600 Mbit/s with the use of four spatial streams
when at a channel width of 40 MHz.
One spacial stream at 20 MHz wide channel enables
72.2Mbps maximum data rate in 802.11n mode.
802.11 N Support Required Defines whether 802.11n support is required (on) or not (off).
On forces the DVW326 to 802.11n mode and clients must
support 802.11n.