User`s guide

Ubee Interactive Using the Forwarding Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014 49
6. Click Apply. The forwarding rule is created and displayed in the table as shown
below. Additional field descriptions follow.
External Start Port Defines the port number to start the range of ports to publish
to the Internet.
External End Port Defines the port number to end the range of ports published to
Internet.
Note: Be very careful with ranges. Ports within a range are not
usable by other applications that may require them. It is
common and safer to enter the same port number as the start
and end of the range.
Protocol Selects the protocol type. Options are UDP, TCP, or BOTH.
Description Names the forwarding rule.
Enabled Disables (Off) or enables (On) the forwarding rule.
Cancel Stops creating the forwarding rule and returns you to the
previous Forwarding screen.
Apply Saves changes.
Port Map Shows a list of common applications and their ports.
Forwarding Table – Lists existing forwarding rules.
Remove All Deletes all entries in the forwarding table.
Label Description
Edit Displays fields for the rule selected in order to change values.
Remove Deletes the rule selected.