User`s guide

Ubee Interactive Using the User Default Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014 29
4.5 Using the User Default Option
The User Default option allows you to restore factory defaults to the Firewall and Access
Control settings. All other networking settings are not cleared and reset (for example,
wireless settings).
Steps
To restore user defaults:
1. Click Status from the main menu.
2. Click User Default from the left side menu. Field descriptions are listed below the
screen example.
Label Description
Restore User Defaults Restores settings to factory defaults. Select Yes then Apply to
reset the device to the default Firewall and Access Control
Content filter settings. This operation does not require a reset
(power cycle) of the system.
Reset The System Resets the system. Select Yes to power cycle the device.
When you select Apply, you will be notified that the DVW326
has been reset. Click RELOAD
. The Login screen will then
appear.
Apply Applies the options selected on this screen.