User`s guide

Ubee Interactive Using the Diagnostics Option
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014 26
4.4.1 Using the Ping Option
Use the Ping utility to test network connectivity between devices by sending a test
message to a specific device. You can also confirm the size of data sent is the same as
the size of data received.
Steps
To test connectivity between devices:
1. Click Status from main menu.
1. Click Diagnostics from the left side menu.
2. Choose Ping from the Utility drop-down menu.
3. Enter new parameter values or accept the default values.
4. Click Start Test. Field descriptions are listed below the screen example.
Label Description
Utility Provides a drop-down menu to choose Ping or Traceroute.
Ping Test Parameters
Target Defines the IP address to which you want to send a ping.
Ping Size Defines the packet size (bytes of data) to send for the ping
operation. Default is 64.
No. of Pings Defines the number of ping commands to send to the ping
target. Default is 3 pings.