User guide

Using the Primary Network Option Ubee Interactive
64 Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • May 2012
6.2.1 Enabling a Closed Network
You can enable the Closed Network option so the SSID cannot be broadcast or seen by
others.
Steps
To enable a closed network:
1. Disable the WPS automatic security configuration.
2. Click Apply.
3. Access the pull down menu for the Closed Network.
4. Choose Enabled to enable a closed network.
WPS Setup AP
UUID Defines the universal unique identifier (UUID) for this access
point.
PIN Defines the Personal Identification Number for this access
point.
WPS Add Client
Add a client Activates wireless protected setup (WPS) security on the
device.
To add a client:
1. Click Add a client. The WPS Add Client screen is
displayed.
2. Click PUSH on the WPS Add Client screen.The WPS
button is activated on the device, indicated by a flashing
white light on top of the unit.
3. Press the WPS button on the device.
Client PIN Defines a PIN number for client access.
Authorized Client MAC Defines the MAC address of the authorized client.
Apply Saves settings when clicked.
Label Description