User guide

Using the Advanced Gateway Setup Port Filtering Option Ubee Interactive
46 Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • May 2012
which you want to deny Internet access. Click Apply. For more information, refer to
Using the DHCP Static Lease Option on page 39. A static lease ensures that the
device always gets the same IP address. That way, if filtered, it gets filtered
continuously. Otherwise, the IP address would change for the device and the filtering
rule would not work.
Note
You may also filter by the MAC address which does not require setting a static lease.
Refer to Using the Advanced Gateway Setup MAC Filtering Option on page 44.
Steps
To filter IP addresses:
1. Click the Gateway link from the top of the screen.
2. Click IP Filtering from the left side of the screen. The IP Filtering fields are explained
following this screen example.
5.9 Using the Advanced Gateway Setup Port Filtering Option
The Port Filtering option allows you to configure port filters to block to all devices on the
LAN Internet services that use specific ports.
Label Description
Start Address Defines the starting IP address to filter.
End Address Defines the ending IP address to filter.
Enabled Activates the rule when enabled is checked.
Apply Saves all screen changes when clicked.