User guide

Using the Time Option Ubee Interactive
40 Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • May 2012
5.5 Using the Time Option
The Time option allows you to configure the system time obtained from network servers
via Simple Network Time Protocol (SNTP).SNTP is a protocol for synchronizing the clocks
of computing devices over networks. The device must be reset for changes to take effect.
Steps
To configure system time:
1. Click the Gateway link from the top of the screen.
2. Click Time from the left side of the screen. The Time fields are explained following
this screen example.
Label Description
Index Provides an index number for each client that connects to your
network.
MAC Address Defines the MAC address of the client to which you want to
assign a static IP address.
IP Address Defines an IP address to the specific client/host.
Enabled Activates this rule when Enable is checked.
Clear Deletes the rule when Clear is checked.
Apply Saves all screen changes when clicked.