User guide

Ubee Interactive Using the DHCP Option
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • May 2012 37
5.3 Using the DHCP Option
The dynamic host configuration protocol (DHCP) option allows you to configure DHCP-
specific behavior on the device.
Steps
To configure DHCP settings:
1. Click the Gateway link from the top of the screen.
2. Click DHCP from the left side of the screen. The DHCP fields are explained following
this screen example.
Label Description
IP Address Displays the IPv6 address of the connected device.
MAC Address Displays the MAC address of the connected device.
Reachability State Displays the status of the neighboring device. Reachable
indicates the device can be contacted and configuration
information can be obtained from the device.