User guide

Using the Operation Config Option Ubee Interactive
26 Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • May 2012
4.5 Using the Operation Config Option
The Operation Config screen displays general information on the device’s active
operational capabilities.
Steps
To view operation configuration information:
1. Click the Modem link from the top of the screen.
2. Click the Operation Config link from the left side of the screen. Field explanations are
listed below the following screen example.
Modulation Displays the current cable modem upstream modulation type
(QPSK/ QAM8 /QAM16/ QAM32/ QAM64/ QAM128/ QAM256).
Symbol Rate
(Ksym/sec)
Displays the symbol rate.
Upstream Mini-Slot Size Displays the current cable modem upstream mini-slot size in
Timebase Ticks of 6.25.
Power Level
(dBmV)
Displays the current cable modem upstream transmit power in
decibel millivolts.
T-1 Displays DHCP time expiration.
T-2 Displays DHCP time expiration.
T-3 Displays range response (RNG-RSP) time expiration.
T-4 Displays range (RNG) time expiration.
Label Description