User guide

Ubee Interactive Understanding LED Operations
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • May 2012 9
1.8.1 Understanding the Device Front Panel
The following image represents the front panel of the device. LED descriptions are
provided in the following table.
1.8.2 Understanding LED Behavior
The following table summarizes the behavior of the device LEDs.
LED Color Description
POWER White On – Internal power-on completes successfully.
Blinks – Power-on fails.
DS/US White Blinks – Initializing.
On – Locked on to upstream (US) and downstream (DS) channels and registered OK.
Blinks – Unable to register or lock.
Blinks – When a firmware upgrade is in progress, the DS/US and TEL1 LEDs blink, first one
then the other for a few seconds. Then DS/US and TEL1 and TEL2 LEDs blink in unison.
ONLINE White Blinks – Obtaining an IP address and configuration file.
On – Configuration completes successfully.
WiFi White On – Wi-Fi is enabled.
Off – Wi-Fi is disabled.
TEL1
TEL2
White On – Telephone is on-hook.
Blinks – Telephone is off-hook.
Blinks – When a firmware upgrade is in progress, the DS/US and TEL1 LEDs blink, first one
then the other for a few seconds. Then DS/US and TEL1 and TEL2 LEDs blink in unison.