User guide

Understanding Default Values and Logins Ubee Interactive
8 Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • May 2012
1.7 Understanding Default Values and Logins
The DVW3201B is pre-configured with the following parameters. Some regions may
change default values using the cable modem or XML configuration file. Check with your
provisioning team to determine the default values for your region.
Local Port Address: 192.168.100.1, Web Interface: http://192.168.100.1
Operation Mode: NAT Mode
Subnet Mask: 255.255.255.0
Wireless Defaults:
 Primary SSID (subscriber-managed) = DVW3201B plus last 2 characters of the
cable modem’s MAC address with upper letters entered in upper case.
Example: DVW3201BE3
Note:
If the subscriber changes the SSID, the device does not revert to this default
SSID when the device is reset, except when a manual reset is performed
through the Web UI (see Understanding the Tools Menu on page 81).
The MAC address can be found on the device label or it can be found by
opening an Internet browser window to the device. Refer to Using the
Information Option on page 21 for instructions.
 Encryption Method = WPA2-PSK with AES encryption
 WPA Pre-shared Key = DVW3201B plus the last 6 characters (3 octets) of the
cable modem’s MAC address (UPPER case, if letters).
Example: DVW3201B9822E3
 WPS PIN = Randomly generated eight digit number
 Device Name: UbeeAP
 MSO and User Web Interface Logins:
Username = last 8 characters of the device MAC address, all UPPER case, no
colons.
Example: If MAC Address = 90:4C:E5:98:22:E3
Username = E59822E3
Password = c0nf1gur3m3 (all letters lower case)
 Standard User Web Interface Login:
Username: user
Password: user
1.8 Understanding LED Operations
The following section describes what the device LEDs indicate.