User guide

Ubee Interactive Using the Advanced Option
Ubee DDW366 Dual-Band Concurrent Advanced Wireless Gateway Subscriber User Guide • September 2014 75
9.3 Using the Advanced Option
Use the Advanced option to configure data rates and Wi-Fi thresholds.
1. Click Wireless from the main menu.
2. Click Advanced from the left side menu. Field descriptions are listed below the screen
example.
Label Description
54g™ Mode Selects the network mode in which to run the DDW366. The
options are:
 54g auto – self adaptive connection
 54g performance – highest speed
 54g LRS – limited speed
 802.11b – connections to 11b clients only.
This field can be set only if 802.11-n Mode is set to Off in the
Radio screen as discussed on Using the Wireless Radio Option
on page 67.
XPress™ Technology Enables or disables the XPress feature. XPress™ is a
standards-based frame-bursting approach to improve 802.11g
wireless LAN performance developed by Broadcom. When
Xpress enabled, aggregate throughput can improve up to 27%
in 802.11g-only networks, and up to 75% in mixed networks
comprised of 802.11g and 802.11b standard equipment.
802.11n Protection Defines the 802.11n Protection setting.
 Auto - the DDW366 uses Request to Send/Clear to Send
(RTS/CTS) to improve the performance in 802.11 mixed
environments.
 Off - the 802.11 performance is maximized under most
conditions, while the other 802.11 modes (802.11b, etc.) are
secondary.