User guide

Ubee Interactive Using the Forwarding Option
Ubee DDW366 Dual-Band-Concurrent Advanced Wireless Gateway Subscriber User Guide • September 2014 48
5. Enter information in the forwarding fields as shown in the screen shot below. Field
descriptions follow.
Label Description
Local IP Address Defines the IP address of the local LAN device to which the
forwarding rule applies. For example, an Xbox or PC.
Local Start Port Defines the starting port number listened to by the server host
located in your LAN.
Local End Port Defines the ending port number listened to by the server host
located in your LAN.
External IP Address Designates another router on the network through which to
forward data.
External Start Port Defines the port number to start the range of ports to publish
to the Internet.
External End Port Defines the port number to end the range of ports published to
Internet.
Note: Be very careful with ranges. Ports within a range are not
usable by other applications that may require them. It is
common and safer to enter the same port number as the start
and end of the range.
Protocol Selects the protocol type. Options are UDP, TCP, or BOTH.
Description Names the forwarding rule.
Enabled Disables (Off) or enables (On) the forwarding rule.
Cancel Stops creating the forwarding rule and returns you to the
previous Forwarding screen.
Apply Saves changes.