User guide

Ubee Interactive Using the Port Filtering Option
Ubee DDW366 Dual-Band-Concurrent Advanced Wireless Gateway Subscriber User Guide • September 2014 44
4. Enter the MAC address to block in the text box to the left of the Add MAC Address
button.
5. Click the Add MAC Address button. The MAC address is displayed in the filtered
MAC address list. Field descriptions are listed below the screen example.
6.4 Using the Port Filtering Option
Use the Port Filtering option to configure port filters to block to all devices on the LAN
Internet services that use the ports specified.
Steps
To configure port filters:
1. Click Advanced from the main menu.
2. Click Port Filtering from the left side menu. Field descriptions are listed below the
screen example.
Label Description
MAC Addresses Defines the MAC address to block. Enter the MAC address in
the field.
Add MAC Address Adds the MAC address to the list of addresses to block.
Addresses entered: n/20 Displays the MAC addresses to be blocked. The number of
MAC addresses entered is shown as 1/20 where 1 is the
number of addresses in the list. You can filter up to twenty
MAC addresses at one time.
Remove MAC Address Deletes the selected MAC address from the list of addresses
to be blocked.
Clear All Removes all MAC addresses from the list.