User guide

Ubee Interactive Using the Connection Option
Ubee DDW366 Dual-Band Concurrent Advanced Wireless Gateway Subscriber User Guide • September 2014 24
Label Description
Startup Procedure (Procedure, Status, Comment)
Acquire Downstream Channel Displays the Downstream channel status and if the device has
locked to a channel.
Connectivity State Displays connection status and if the DDW366 is operational.
Boot State Displays the status on boot up and if the device is operational.
Configuration File Provides the status and file name of the configuration file
currently used by the DDW366.
Security Displays the status of the security settings: enabled/disabled.
Downstream Bonded Channels
Channel Numbers the downstream channels.
Lock Status Displays if the device has locked successfully to a
downstream channel.
Modulation Displays the modulation method required for the downstream
channel to lock on to by the device. This method is
determined by the service provider.
Channel ID Displays the downstream channel ID.
Frequency Displays the downstream channel frequency on which the
device is locked.
Power Displays the receiver power level in decibel millivolts (dBmV)
after ranging process.
SNR Displays the signal-to-noise ratio (SNR) in decibels (dB), the
desired signal level to the background noise level.
Correctables Displays the quantity of codewords which are correctable.
Uncorrectables Displays the quantity of codewords which are not correctable.
Upstream Bonded Channels
Channel Numbers the upstream channels.
Lock Status Displays if the DDW366 succeeded in locking to an upstream
channel.
US Channel Type Displays the channel type.
Channel ID Displays the current upstream channel ID.
Symbol Rate Displays the symbol rate in 1000 symbols per second.
Frequency Displays the current cable modem upstream frequency in
hertz.
Power Displays the current cable modem upstream transmit power in
decibel millivolts (dBmV).