User guide

Ubee Interactive 3.8 Wireless
DDW3612 Subscriber User Guide • July, 2010 47
NPHY Rate Set the Physical Layer (NPHY) rate. These rates are only
applicable when the 802.11n mode is configured as Automatic.
802.11n Protection If you select Auto, the DDW3611 will use Request to
Send/Clear to Send (RTS/CTS) to improve the performance in
802.11 mixed environments. If you select Off, the 802.11
performance will be maximized under most conditions, while the
other 802.11 modes (802.11b, etc.) will be secondary.
Multicast Rate Specify the rate at which multicast packets are transmitted and
received on your wireless network.
Apply Click to submit changes.