User guide

Ubee Interactive 3.8 Wireless
DDW3612 Subscriber User Guide • July, 2010 39
3.8 Wireless
This chapter contains instructions for all wireless configuration settings.
1. Access the web interface. Refer to page 7, if needed.
2. Click the Wireless link from the top of the screen.
Note: If having wireless issues or questions, refer to “Wireless Network
Deployment and Troubleshooting” on page 52.
3.8.1 Wireless - Radio
The Radio option allows you to configure the wireless radio including the current
country, channel number, and bandwidth control.
1. Access the web interface. Refer to page 7, if needed.
2. Click the Wireless link from the top of the screen.
3. Click Radio from the left side of the screen. The Radio fields are explained
following this screen example.
Label Description
Wireless Interfaces Displays the Wireless name / MAC address.
Wireless Displays the wireless radio’s status, Enabled or Disabled.
Country Select the country where you use this device.
Output Power Set the percent of the Output Power for the radio.
802.11 Band You can choose 2.4Ghz or 5 Ghz. Note: The distance
coverage for 5Ghz is less than 2.4Ghz.